Revlimit - Special Bosch MED9 tuning features

[hammersword]

Special tuning features are now available for any VAG car which is equipped with Bosch MED9 system

* Multimap switch
You have up to 4 extra programs in the ECU. It can be switched via CC or via brake and gas pedals combination.
e.x Audi S3 2.0TFSi
mapset 1 -> Stock
mapset 2 -> 95oct 320hp
mapset 3 -> 100oct 380hp
mapset 4 -> 100+meth 420hp (or E85)
In the mapsets we can custom tune anything you may like, the above is just an example
The feedback of the selected mapset each time can be done via tachometer or MIL/EPC light blinking

* user adjustable Antilag - Launch Control
- We can set soft Launch Control with ignition cut or hard Launch Control via ignition retard
- The user adjustable option works like this: in 4sec you have to push 2 times the brake pedal and 3 times the clutch pedal, MIL blinks and ECU comes to Launch RPM set-up, push gas pedal to raise the RPM to desired and then push brake to store it.

* Shift light with EPC lamp
We can set the shiftligh blinks independently for each gear, ex:
1st @ 7100
2nd @ 7100
3rd @ 6900
4th @ 6800
...

* Flatshift (known as No Lift to Shift)
We can set it with ignition retard and ignition cut


Promo video coming soon in early August!

Stay tuned,
Revlimit

[n0ble]

Im interested in antilag launch control.

Do you have any further purchase details?

Thanks

Sent from my GT-I9505 using Tapatalk 2

[hammersword]

Hello n0ble,

Contact me to my personal e-mail for any further info about you and your company or if you are the end-user
info.revlimit@gmail.com

Regards,
Fotis

[marast]

I keep my fingers crossed, man, it's great to watch your progress, I can imagine the energy that you put into it.

[hammersword]

Stay tuned with more critical updates at the end of summer

Now we are working on MED17 ECUs to release these features to them!

[guille_masco]

Congratulations! inbox soon

[hammersword]

multimap switch

http://www.youtube.com/watch?v=v6AkLCjBTXg

check the video

[scalp06]

multimap switch

http://www.youtube.com/watch?v=v6AkLCjBTXg

check the video

Good job Fotis!

[acab]

no news about med17?

[hammersword]

Hi,

MED17 of VAG aren't ST10 based ECUs. They are Tricore.

It is needed a lot of time to analyzed and disassembled.

Probably in 2014

Regards,
Fotis

[acab]

i know

but not vag are tricore

[hammersword]

And what do you think is Bosch MED17 with TC1796 or TC1766???

[msundercober]

LC possible on TTRS handshifter too ?

If yes pm me

[hammersword]

I didn't test it yet, but possibly it can be done

Make a good read out of the Flash + Processor via BDM, send a pm your e-mail via PM and I will contact you

cheers,
Fotis

[acab]

And what do you think is Bosch MED17 with TC1796 or TC1766???

i think TC1766

[jackp92]

Awesome work.

I need this on the MED17

[hammersword]

***** New feature added *****

- Knock warning
We all know block 020 in VCDS which shows timing retard. Now the MIL will warn you that the ECU does high timing retardation by flashing it. There will be 2 stage MIL flashing:
* 1st stage will be at -7 degrees (the MIL blinks 2 times faster than misfire blinking)
* 2nd stage will be at -10 degrees (the MIL blinks too fast)

This is an excellent feature for high performance optimized files and high performance engine!

It is an innovative safety feature in Motronics

Stay tuned,
Revlimit

[msundercober]

I didn't test it yet, but possibly it can be done

Make a good read out of the Flash + Processor via BDM, send a pm your e-mail via PM and I will contact you

cheers,
Fotis

I was on vacation i´ll send Original BDM tomorow !

Greetz

D.

[hammersword]

***** New feature added for VAG DSG 2.0TFSi *****

userSetable antlilag-Launch Control is now available for all DSG equipped VAGs.

The user selectable feature takes place with CC buttons when you are in Launch.

* A MUST is to increase or deactivate the DSG launch control

The feature works the same as the DSG Launch Control but you have a building boost LC using antilag options like timing retard
- Tap the brake, then WOT, then release brake and you take off!

Stay tuned,
Revlimit

[kaross]

It is only ECU modification or also DSG soft needs to be touched?

[hammersword]

ECU modification only.

From DSG TCU you just need to increase or deactivate its LC!

[enigmauk]

Wow I am impressed

[hammersword]

*** Revlimit news for VAG 1.8T, 2.0TFSi, 2.7T, R32 ***

* Release of Knock Protection feature
* Release of Lambda Lean Protection feature
* Release of gear dependent boost control controlling directly the WG DC per gear as the most aftermarket EBC

KNOCK PROTECTION
The Knock Protection feature will limit the Throttle's opening angle to 25% for a 10sec period, each time that the ECU will monitor 10deg advance timing retard via the knock control
(the knock control timing retard can be monitored with VCDS logger in Measuring Block 020 (MB020))
There will be also a secondary Knock Warning feature that will warn the driver, via MIL blinking, that the ECU timing retard is higher than normal levels
Knock Warning active when timing retard >= 9deg
Knock Protection active when timing retard >= 11deg

LAMBDA LEAN PROTECTION
The Lambda Lean Protection feature will limit the Throttle's opening angle to 25% for a 10sec period, each time that the ECU will monitor a lambda positive deviation of 0.04 (requested lambda 0.82 - actual lambda 0.86) for a period of more than 2.5sec

The protection (lambda lean or Knock) notification in dashboard will be done via a special blinking of MIL


Stay tuned,
Revlimit team

[SpeedParts]

**** Release of gear dependent boost control controlling directly the WG DC per gear as the most aftermarket EBC

That is a greaaaaaaaaaaaat feature ! New 3D map I assume ? Great Job Fotis

[hammersword]

Yes, correct!

We are trying also to install a new map 3D with RPM vs accPED axis and dutycycle in order to run opel loop boost controlling!
There is one 6x1 map on MED17.5, but it is just 6x1 and doesn't help very much on bigger turbos or special K04 setups