Page 1 of 1

NEW: Standalone BENCH programmer from AMT-Cartech!

Posted: Wed Sep 16, 2020 6:58 pm
by tabster
AMT BST supports bench mode for Bosch MEDC17 / MDG1 (EDC16/ME9 coming soon)

For more info visit: https://chiptuningshop.com/product/amt-bst/

Re: NEW: Standalone BENCH programmer from AMT-Cartech!

Posted: Tue Sep 29, 2020 5:39 pm
by Polska85
This correct Checksumme in eeprom too?

Re: NEW: Standalone BENCH programmer from AMT-Cartech!

Posted: Tue Sep 29, 2020 8:17 pm
by cherry
MPPS tricore has option for MEDC17 eeprom checksum, so i expect BST should make too. If not there is no reason why he should not add it.

Re: NEW: Standalone BENCH programmer from AMT-Cartech!

Posted: Thu Apr 08, 2021 11:10 pm
by tabster
AMT BST Update V1.0.6.6

Bench mode: Bosch EDC16 ECUs based on Motorola MPC5xx microprocessor. Read/Write Int/Ext Flash + EEprom. Flash checksum correction included.

Bench mode: Bosch VAG MED9 based on Motorola MPC5xx microprocessor. Read/Write Int/Ext Flash + EEprom. Flash checksum correction included. (Other brands using ME(D)9 will be added in future release)

Connection manual format revised, now split into separated pdf per ECU type.

AMT-BST currently supports bench mode programming for Bosch ECUs: EDC16, MED9 , EDC17, MED17, MD1, MG1

More info: https://chiptuningshop.com/product/amt-bst/